This equipment was devised by the British
as a method of converting a normal combat tank into a temporary amphibious tank
for sea or river crossing. Developed during April 1943, Sherman DD tanks were
used in the Normandy landings. For conversion the tank was waterproofed and
fitted with a collapsible screen and 36 rubber air-tubes or pillars. This
assembly was attached to a deck that had been welded round the hull of the
tank. The rubber pillars were filled by compressed air, carried in two
cylinders on the hull of the vehicle, on being inflated the tubes raised the
canvas screen which was then locked into position by struts. On entering the
water the screen acted as a flotation device. Two small screw propellers,
driven from the bevel drive of the vehicle, propelled the tank at approximately
4 knots. On reaching the shore the air was released from the air tubes causing
the screen to collapse and the vehicle reverted to its normal combat role.
Various marks of Sherman DD equipment existed, later marks having metal
framework for the screen.
Sherman
III and V DD: These were the original conversions
using similar screens and fittings to the Valentine DD.
Sherman
III and V DD Mk I: Improved conversion for issue to
troops with strengthened top rail and inter-locking struts.
Sherman
III DD Mk II: DD Mk I with detail improvements.
Sherman
III and IIIAY DD Mk III: American conversions for
British and (limited) American use with detail changes. Latter vehicle had HVSS
and 76mm gun. In British service late 1945.
I presume that once the DD had gotten off the beach the flattened screen would be removed as quickly as possible?
ReplyDelete